Home
Pipe Products
Building products
Contact Pipe Products Division
Logan Clay Home Page
NCPI
The Legacy of a job done right
Product Specs News & Job Histories Engineering Library Contractors Corner Environment Statement About Logan
 
Installation

Proper installation is fundamental to ensuring the performance of all pipe products. The following illustrations show some suggestions for installing Logan Clay pipe. For more information, contact us or refer to ASTM C 12.


Step 1

Dig bell or coupling holes
before pipe is laid. The hole should be just deep enough to run your fingers under the entire bell after the pipe is laid.

Step 2

Clean bell and spigot, including the O-ring groove.

Step 3

Equalize the tension in the O-ring by running a screwdriver or smooth tool completely around the spigot under the O-ring.

Step 4

Lubricate both the spigot and socket ends liberally to allow pipe to slide home. Make sure the gasket is in place by running your fingers completely around the assembled joint.

Step 5

If a bar is used to shove the pipe home, use a block of wood to cushion the bell.


Step 6

Shovel-slice bedding material into the pipe haunches (not under the bell) for the entire length of the pipe to ensure uniform support.

   

Shipping & Pack Data
Variance Data
"Plant Tour"
NCPI Toolbox
Point Repairs & Laterals
Installation Guidelines

"Forty percent of our system is clay...We televised these lines based on the original risk equation, which indicated that due to age, these should be our areas of most significant risk. But they haven't degraded at all over time. Based on the way these pipes look they could easily last 200, 300 or 400 years."

Terry Martin, P.E.
Strategic Advisor to the
Corporate Asset Management Group
Seattle, Washington

 

PDF File Printer-Friendly
Instructions

Get Adobe Reader
You will need Adobe Acrobat Reader to open the Product Sheet. If you are having trouble opening the product sheet, please click the "Get Adobe Reader" button above.

 

 

 

 

 

 

 

 

 

 

About Us | News & Job Stories | Engineering Library | Contractors' Corner | Products | Environmental Statement | Pipe Products Home
201 S. Walnut Street • Logan, Ohio 43138-0698 • Toll-Free: (800) 848-2141 • Fax: (740) 385-9336 - Directions
© 2016 Logan Clay Pipe. All rights reserved.

Visit our other Logan Clay Products affiliates: Logan Foundry & Machine Shop, NO-DIG Pipe and Sawmiller, LLC.